Examples of valid pathnames include:
0: Volume 0
0:\ Root directory on volume 0
0:\MyDir \MyDir directory
0:\My/Dir\Gen/Dir \Gen/Dir directory in
\My/Dir directory
0:\dir0\file1 file1 file in \dir0 directory
0:\DIR1\DIR2\File1 File1 file in \DIR2 directory
in \DIR1 directory
0:\DIR1\Prefix/Suffix Prefix/Suffix file in \DIR1
directory
<binary data> — This is the binary file data to be
appended or used to create a new file.
Example: Using the
FSAPPEND
Command
This example demonstrates using the FSAPPEND
command to append a file.
@PJL FSAPPEND FORMAT:BINARY
~NAME = "0:\pcl\macros\OurLogo"
~SIZE = 35<CR><LF>
35 bytes of macro data
<ESC>%-12345X
Related Commands: FSDELETE, FSDIRLIST, FSDOWNLOAD, FSINIT,
FSMKDIR, FSQUERY, FSUPLOAD
PJL File System Commands 9-3
To Next Page
Loading...
