command contained an illegal NAME variable. See PJL
File System Errors (32xxx) in Appendix D for a complete list
of error codes.
Example:
Using the FSQUERY
Command
The following two command lines demonstrate using the
FSQUERY command to check for the existence of a file and
a directory on the printer’s file system.
@PJL FSQUERY NAME = "0:\pcl\file1" <CR><LF>
@PJL FSQUERY NAME = "0:\pcl\macro\" <CR><LF>
Related Commands: FSAPPEND, FSDELETE, FSDIRLIST, FSDOWNLOAD,
FSINIT, FSMKDIR, FSUPLOAD, INFO FILESYS
PJL File System Commands 9-11
To Next Page
Loading...
