HP Color laserjet 5500 - Page 264

Example:
Switching Printer
Languages
The job in this example prints two pages: one in PCL and
one in PostScript. The program first enters PCL, and then
immediately enters HP-GL/2 to draw a box and print “PCL
Print Job.” Next, PostScript is entered and PostScript data
is sent to the printer to draw a box and print “PostScript
Job.”
<ESC>%-12345X@PJL <CR><LF>
@PJL COMMENT **Beginning of PCL Job** <CR><LF>
@PJL COMMENT **Enter PCL (& HP-GL/2)* <CR><LF>
@PJL ENTER LANGUAGE = PCL <CR><LF>
<ESC>E<ESC>%0BIN;SP1;PA1010,1010;PW2.2;
~PD5310,1010,5310,5310,1010,5310,1010,1010;
~PU;PA2280,3040;
~SD1,277,2,1,4,20,5,0,6,0,7,4148;
~DT*;SS;LBPCL Print Job*;
~<ESC>%0A<FF><ESC>E
~<ESC>%-12345X@PJL <CR><LF>
@PJL COMMENT *** END OF PCL JOB & *** <CR><LF>
@PJL COMMENT ** START OF POSTSCRIPT * <CR><LF>
@PJL ENTER LANGUAGE = POSTSCRIPT <CR><LF>
5 setlinewidth<CR>
100 100 moveto<CR>
0 300 rlineto<CR>
300 0 rlineto<CR>
0 -300 rlineto<CR>
closepath<CR>
stroke<CR>
185 240 moveto<CR>
/Helvetica findfont 20 scalefont setfont<CR>
(PostScript Job) show<CR>
showpage<CR>
^D
~<ESC>%-12345X
C-2 Programming Examples