HP Color laserjet 5500 - Page 76

General PJL Environment Variables
Variable Description Sample Value
Range
IMAGEADAPT Default for Image Adapt feature. ON enables
Lossy compression for use on any images that
need to have compression performed. AUTO
causes the printer to evaluate other compression
alternatives first before Lossy is considered. OFF
disables use of Lossy compression.
ON, OFF, AUTO
INTRAY1 Returns the auto-selection lock status for the
MP tray (LaserJet 4/4M, 4/4M Plus, 4V/4MV)
or upper tray (LaserJet 4Si/4SiMx).
LOCKED,
UNLOCKED
INTRAY2 Returns the auto-selection lock status for the
standard cassette (LaserJet 4/4M, 4/4M Plus,
4V/4MV) or lower cassette (LaserJet 4Si/
4SiMx).
LOCKED,
UNLOCKED
INTRAY3 Returns the auto-selection lock status for the
optional cassette (LaserJet 4/4M, 4/4M Plus,
4V/4MV) or envelope feeder (LaserJet
4Si/4SiMx). INTRAY3 is a valid variable only if
installed. If it is not installed, the printer
returns “?” instead of LOCKED / UNLOCKED,
indicating that the variable is unknown.
LOCKED,
UNLOCKED
INTRAY1SIZE Returns the size of the paper currently
installed in the MP tray (LaserJet 4/4M,
4/4M Plus, 4V/4MV), upper tray (LaserJet
4Si/4SiMx), or tray 1 (5/5M/5Si/5SiMx/5Si
Mopier/4000 series).
LETTER, LEGAL,
A3, A4, CUSTOM,
A5, LEDGER,
EXECUTIVE,
JISB4, JISB5, B5
COM10, C5, DL,
JPOST, JPOSTD,
MONARCH
INTRAY2SIZE Returns the size of the paper currently
installed in the standard cassette (LaserJet
4/4M, 4/4M Plus, 4V/4MV, 5/5M), lower
cassette (LaserJet 4Si/4SiMx), or tray 2
(5Si/5SiMx/5Si Mopier).
LETTER, LEGAL,
A4, A3, LEDGER,
EXECUTIVE,
JISB4, JISB5,
CUSTOM
6-14 Environment Commands