General PJL Environment Variables
Variable Description Sample Value
Range
JOBOFFSET Sets the default job offset state. ON, OFF
LANG Sets the default display language for the
display panel and unsolicited status feedback
display panel messages.
ENGLISH,
FRENCH,
GERMAN,
ITALIAN,
SPANISH,
SWEDISH,
CHINESE,
JAPANESE,
TURKISH,
POLISH,
NORWEGIAN,
and others (see
Appendix A)
LOWTONER Returns configuration for low-toner messages.
If ON or CONTINUE, printer remains online
when the LOW TONER message is displayed;
if OFF or STOP, printer goes offline and waits
until On Line or Continue key is pressed.
ON, OFF, STOP,
CONTINUE
MANUALFEED Manual feed mode. ON, OFF
MARGINS Sets the margins for the plot. The SMALLER
and EXTENDED values are used only with
roll-feed plotters to reduce the amount of
waste media between plots.
NORMAL,
SMALLER,
EXTENDED
MEDIASOURCE Sets the default location of the input media for
the current PJL job.
TRAY1, TRAY2,
TRAY3
MEDIATYPE Sets the default media type for the current
PJL job.
PAPER, SPECIAL,
TRANSPARENCY,
GLOSSY
MIRROR Horizontal reflection of plots. ON, OFF
MPTRAY Returns the configuration value of the multi-
purpose tray.
CASSETTE,
MANUAL, FIRST
6-16 Environment Commands
To Next Page
Loading...
