HP Compaq NC4010 Software Guide

Power
Software Guide 2–7
Initiating or Resuming from Standby
Task Procedure Result
User-initiated
Standby
■ With the notebook on,
press
Fn+F3.
■
Through the operating
system:
❐ In Windows 2000,
select Start > Shut
Down > Standby, then
select the OK button.
❐ In Windows XP, select
Start > Turn Off the
Computer > Standby.
(If the Standby option
is not displayed, press
the
shift key.)
■ The power light
blinks.
■ The screen clears.
System-initiated
Standby
■ If the notebook is attached
to AC power, the system
will not initiate Standby.
■ If the notebook is running
on battery power, the
system initiates Standby
by default after 10 minutes
of notebook inactivity.
■ Power settings and
timeouts can be changed
in the Power Options
window.
■ The power light
blinks.
■ The screen clears.
Resume from
user-initiated or
system-initiated
Standby
Press the power button.
■ The power light
turns on.
■ Your work returns
to the screen.
310029-002.book Page 7 Friday, October 24, 2003 1:48 PM

HP Compaq NC4010 Specifications

General

Brand	HP
Model	Compaq NC4010
Category	Laptop
Language	English