HP Compaq NC4010 Software Guide

Computer Setup
Software Guide 7–5
Selecting from the Advanced Menu
Select To Do This
Language (or press F2) Change the Computer Setup language.
Boot Options
■ Enable/disable QuickBoot, which
starts the notebook more quickly by
eliminating some startup tests. (If you
suspect a memory failure and want
to test memory automatically during
startup, disable QuickBoot.)
■ Enable/disable MultiBoot, which sets
a startup sequence that can include
most bootable devices in the system.
For details, refer to Chapter 5,
“MultiBoot.”
■ Set the boot order.
Device Options
■ Enable/disable Num lock mode at
startup.
■ Enable/disable multiple standard
pointing devices at startup. (To set the
notebook to support only a single,
usually nonstandard, pointing device
at startup, select Disable.)
■ Select a parallel port mode: EPP
(Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced
Capabilities Port).
(Continued)
310029-002.book Page 5 Friday, October 24, 2003 1:48 PM

HP Compaq NC4010 Specifications

General

Brand	HP
Model	Compaq NC4010
Category	Laptop
Language	English