5–6 Software Guide
MultiBoot
3. In the Express Boot Popup Delay (Sec) field, select the length
of time in seconds that you want the notebook to display the
Express Boot menu before it defaults to the current
MultiBoot setting. (When 0 is selected, the Express Boot
menu is not displayed.) This time interval is known as the
timeout.
4. To save your settings and exit Computer Setup, use the arrow
keys to select File > Save Changes and Exit, then follow the
instructions on the screen.
The new settings are saved when you exit Computer Setup.
Changes will be in effect when the notebook restarts.
Entering MultiBoot Express Preferences
When the Express Boot menu is displayed during startup:
■ To specify a startup location from the Express Boot menu,
select your preference within the timeout, then press
enter.
■
To prevent the notebook from defaulting to the current
MultiBoot setting, press any key within the timeout. The
notebook will not start up until you select a startup location
and press
enter.
■
To allow the notebook to start up according to the current
MultiBoot setting, wait for the timeout to expire.
310029-002.book Page 6 Friday, October 24, 2003 1:48 PM
To Next Page
Loading...
Need help?
General