3–4 Software Guide
Security
Understanding HP and Windows Passwords
HP security features and Windows operating system security
features work independently from one another. For example, a
device disabled in Computer Setup cannot be enabled in
Windows.
HP passwords and Windows passwords are also independent of
one another. The following table lists the different passwords
used by HP and Windows and describes their functions.
HP passwords* Function
HP Administrator password Used to access Computer Setup.
Power-on password Used to access the notebook during
Startup.
DriveLock user password Used by the day-to-day user to access
drives protected by DriveLock at
startup.
DriveLock master password Used by the HP administrator to
access drives protected by DriveLock
and to remove DriveLock protection
from the drive.
Smart Card password Stores the Windows Administrator and
User passwords and is used to access
Windows during startup on notebooks.
Power-on and HP Administrator
passwords can be stored on Smart
Cards if the Smart Card Reader
supports this functionality.
*HP Passwords must be enabled in Computer Setup. For more
information, refer to Chapter 7, “Computer Setup” in this guide.
(Continued)
310029-002.book Page 4 Friday, October 24, 2003 1:48 PM
To Next Page
Loading...
