HP Compaq NC4010 Software Guide

7–6 Software Guide
Computer Setup
Select To Do This
Device Options (continued)
■ Enable/disable USB legacy support
for a USB keyboard, mouse, and
hubs. When USB legacy support is
enabled:
❐ A USB keyboard, mouse, and
hubs work even when a Windows
operating system is not loaded.
❐ The notebook can start from a
bootable hard drive, diskette drive
diskette, SuperDisk drive disk, or
CD or DVD inserted into a drive
connected by USB to the
notebook or an optional Port
Replicator.
■ Enable/disable all settings in the
SpeedStep window. (When Disable
is selected, the notebook runs in
Battery Optimized mode.)
■ Swap the functions of the Fn key and
left ctrl key.
310029-002.book Page 6 Friday, October 24, 2003 1:48 PM

HP Compaq NC4010 Specifications

General

Brand	HP
Model	Compaq NC4010
Category	Laptop
Language	English