HP cr0970nd - Solid-State Drive Specifications (SATA-3)

Solid-state drive specications (SATA-3)
This section provides specications for your solid-state drive.
Table 10-4 Solid-state drive specications
128 GB*
Dimensions
Height 1.35 mm
Weight < 10 g
Interface type SATA-3
Ready time, maximum (to not busy) 1.0 ms
Access times, logical 0.1 ms
Transfer rate up to 540 MB/s
Total logical sectors 234,441,648
Operating temperature 0°C to 70°C (32°F to 158°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specications can
dier slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
78 Chapter 10Specications