HP dx2200 - Microtower PC User Manual

2–10 415606-001 Service Reference Guide, dx2200 MT
Setup Utilities and Diagnostics Features
Current System
Temperature
(view only)
Current CPU Fan
Speed
(view only)
Current System Fan
Speed
(view only)
Vcore (view only)
+12V (view only)
VCC5 (view only)
+3.3V (view only)
VBAT (V) (view only)
3VSB (V) (view only)
Load
Optimized
Defaults
Allows you to reset Computer Setup to factory defaults.
Set
Supervisor
Password
Allows you to establish a password to control access to
Computer Setup.
Set User
Password
Allows you to establish a password to control access to the
computer. (Supervisor password must be set before you can set
a User password.)
Save & Exit
Setup
Allows you to save current settings and exit Computer Setup.
Exit Without
Saving
Allows you to exit Computer Setup without saving changes.
✎
Support for Computer Setup options may vary depending on your specific hardware configuration.
Heading Option Description

HP dx2200 - Microtower PC Specifications

General

Chipset	Intel 945G Express
Memory	Up to 4 GB DDR2 SDRAM
Graphics	Integrated Intel Graphics Media Accelerator 950
Audio	Integrated High Definition audio
Network	Integrated 10/100/1000 Ethernet
Front Ports	2 USB 2.0, headphone, microphone
Power Supply	300W
Processor	Intel Pentium 4 or Intel Celeron
Optical Drive	DVD-ROM
Expansion Slots	1 PCI Express x16, 3 PCI
Operating System	Windows XP Professional or FreeDOS
Rear Ports	4 USB 2.0, VGA, Ethernet, Line-in, Line-out, Microphone
Storage	SATA Hard Drive (capacity varies)
USB Ports	8 USB 2.0 (2 front, 4 rear, 2 internal)