EasyManua.ls Logo

HP dx2810 - Microtower PC - Removing or Installing an Expansion Card

HP dx2810 - Microtower PC
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Removing or Installing an Expansion Card
The computer has two standard PCI expansion slots, one PCI Express x1 expansion slot, and one PCI
Express x16 expansion slot. The expansion slots accommodate full-height or half-height expansion
cards.
Figure 8-32 Expansion Slot Locations
Table 8-3 Expansion Slot Locations
Item Description
1 PCI expansion slot
2 PCI expansion slot
3 PCI Express x1 expansion slot
4 PCI Express x16 expansion slot
NOTE: You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16
expansion slot.
1. Prepare the computer for disassembly (Preparation for Disassembly on page 83).
2. Remove the access panel (
Access Panel on page 84).
Removing or Installing an Expansion Card 109

Table of Contents

Related product manuals