EL-MF877-00 Page 1
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Monitors and DisplaysExternal Options
Marketing Name / Model
[List multiple models if applicable.]
Name / Model #1 :HP E22 G4
Name / Model #2 : HP E22 G4 FHD Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the
disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive
2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the
plastic part. For any questions on plastic marking, please contact HP’s Sustainability Contact
.
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description Notes
of items
included
in
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
I/F Board*1, Control Board*1, SPS Board*1
Batteries, excluding Li-Ion batteries.
All types including standard alkaline, coin or button style batteries
Li-Ion batteries. Include all Li-Ion batteries if
more than one is provided with the product (such
as a detachable notebook keyboard battery, RTC
coin cell, etc.)
Battery(ies) are attached to the product by (check all that apply
with an “x” inside the “[ ]”):
[ ] screws
[ ] snaps
[ ] adhesive
[ ] other. Explain
NOTE: Add detailed removal procedures including required tools in
the sections 3.1 and 3.2.
Mercury-containing components
For example, mercury in lamps, display backlights, scanner lamps,
switches, batteries
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas discharge
lamps panel*1
Capacitors / condensers (Containing PCB/PCT)
C1157,C1166,C7703,C905,C922,C929,C916,C928,C904,C714,C715
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs