Need help?Do you have a question about the HP E2620 and is the answer not in the manual?
General| Model | HP E2620 |
|---|---|
| Jumbo Frame Support | Yes |
| Manageable | Yes |
| Ports | 24 or 48 10/100/1000 ports |
| Uplink Ports | 4 SFP ports |
| Layer | Layer 2 |
| Management | Web, CLI, SNMP |
| PoE Support | Available on some models (PoE+) |
| MAC Address Table Size | 16000 entries |
| Operating Temperature | 0°C to 45°C |
| Switching Capacity | Up to 128 Gbps |
| Throughput | Up to 95.2 Mpps |
| Weight | 3.7 kg |
| Operating Humidity | 15% to 95% non-condensing |
General introduction to the HP E2620 Switches, covering their purpose and key features.
Details on PoE/PoE+ capabilities and support for Redundant/External Power Supplies.
Diagrams and explanations of front panel components, including status and port LEDs.
Description of the Console Port, RPS/EPS Input, and AC power connectors.
List of included parts, safety warnings, and step-by-step installation guidance.
Instructions for rack, wall, surface mounting, and connecting power and network cables.
Steps for setting IP address, subnet mask, and manager password via console.
Methods for managing the switch remotely using Telnet or a web browser interface.
Common issues, basic troubleshooting tips, and interpreting LED error patterns.
Performing hardware tests, restoring default configurations, and contacting support.
Technical specifications including dimensions, electrical ratings, and environmental limits.
Guidelines for network cable types, speeds, distances, and connector requirements.
Detailed pin-out diagrams and wiring rules for twisted-pair network cables.
Essential safety precautions, grounding, servicing, and hazard warnings.
Compliance statements for electromagnetic compatibility across different regions.
Information on the proper disposal of waste electrical and electronic equipment.
To Next Page