HP E2620 User Manual

A-2
Switch Specifications
RPS/EPS Electrical Input
Environmental
BTU Ratings
E2620 Non-PoE Switches
AC voltage Input voltage Maximum current
E2620-24 (J9623A) RPS Input
EPS Input
+12 VDC
N/A
2.5A
N/A
E2620-48 (J9626A) RPS Input
EPS Input
+12 VDC
N/A
5.0A
N/A
E2620-PoE+ Switches
E2620-24-PPoE+ (J9624A)
RPS Input
EPS Input
+12 VDC
N/A
3.0A
N/A
E2620-24-PoE+ (J9625A)
RPS Input
EPS Input
+12 VDC
+54 VDC
4.0A
8.0A
E2620-48-PoE+ (J9627A)
RPS Input
EPS Input
+12 VDC
+54 VDC
4.0A
8.0A
E2620 Switches Operating Non-Operating
Temperature 0°C to 55°C (32°F to 131°F) -40°C to 70°C (-40°F to 158°F)
Relative humidity
(non-condensing)
15% to 95% at 40°C (104°F) 15% to 90% at 65°C (149°F)
Maximum altitude 3.0 Km (10,000 ft)* 4.6 Km (15,000 ft)
* The operating maximum altitude should not exceed that of any accessory being connected
to any switch in the E2620 series.
Switch Model Combined BTU
1
Switch only BTU
E2620-24-PPoE+ 827 181
E2620-24-PoE+ 2281 410
E2620-48-PoE+ 2281 410
E2620-24 Non-PoE 142
E2620-48 Non-PoE 285
1
Includes switch and maximum number of PoE powered devices
connected to the switch at 30 watts.

HP E2620 Specifications

General

Model	HP E2620
Jumbo Frame Support	Yes
Manageable	Yes
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP ports
Layer	Layer 2
Management	Web, CLI, SNMP
PoE Support	Available on some models (PoE+)
MAC Address Table Size	16000 entries
Operating Temperature	0°C to 45°C
Switching Capacity	Up to 128 Gbps
Throughput	Up to 95.2 Mpps
Weight	3.7 kg
Operating Humidity	15% to 95% non-condensing