HP E2620

2-23
Installing the Switch
Installation Procedures
External Power Supply Connectivity
This section shows some recommended connection topologies using the
external power supplies.
600 RPS/EPS
The 600 RPS/EPS can provide backup power support for up to six HP switches.
In the illustration below, one HP E2620-24-PoE+ switch is connected to an
RPS port on a 600 RPS/EPS.
Figure 2-15. Connecting RPS to one switch
620 RPS/EPS
The 620 RPS/EPS can provide backup power support for two HP switches. In
Figure 2-16, two HP E2620 PoE+ switches are connected to the RPS ports on
a 620 RPS/EPS.
Figure 2-16. Connecting RPS to two switches