HP E27m G4

17
Power board
The power board part number is PLPCLH351IQA3 (1
st
source) or
PLPCLH511AQA1 (2
nd
source).
Before removing the power board, follow these steps:
▲ Prepare the monitor for disassembly. See Preparation for disassembly on page 14.
Remove the power board:
1) The HP E24m G4 power board connector position is as follows:
2) Locate the part number location on the board
Connector repair
This procedure includes HDMI, DisplayPort, USB Type-C, RJ45 and USB3.0 connectors.
Warning: After unplugging the
power supply, the capacitance
is still charged, do not touch
and discharge the capacitor.
CN910
CN801