7
to 65 W of power to a device. Power delivery outputs are
20V/3.25A, 15V/4.33A, 12V/5A, 9V/3A, 5V/3A to achieve a 65 W
output.
-C cable from a source device to this
port on the monitor enables USB ports on the monitor.
(7)
-45 (network)
Network (RJ-45) data rate via USB Type-C max speed is 1000
Mbps
Green (right): The network is connected.
Amber (left): Activity is occurring on the network.
NOTE: Supports Wake on Lan (WOL) In-band, Mac Address
Passthrough (MAPT) in-band (HP models only), and PXE boot.
The functionality may vary with PC settings.
This network port is fully energy efficient according to IEEE
-2010) as long as all connected devices
(8)
-A port
Connects a USB device to transfer data.
(9)
-C
Connects a USB Type-C cable to a peripheral USB device,
provides data transfer, even when the monitor is in Sleep
mode or DC off with OSD Performance mode on. This port
charges most devices (15 W), such as a smart phone or a
tablet.
Cables or adapters may be required (purchased
(10)
-A port
-A
-
USB port: Connects a USB device, provides data transfer, and
(for select products) charges small devices (such as a
smartphone) when the computer is on or in Sleep mode.
USB port with battery fast-charging 1.2 (5 V × 1.5 A = 7.5 W):
Connects a USB device, provides high-speed data transfer,
and charges small devices (such as a smartphone), even
when the monitor is DC off with OSD performance mode on.
Use a standard USB Type-A charging cable or cable
adapter (purchased separately) when charging a small
external device.
To Next Page
Loading...
Need help?
General
