1
1 Getting started
Read this chapter to learn about safety information and where to find additional HP resources.
Important safety information
Carefully read the cautions and notes within this document to minimize the risk of personal injury
to service personnel. The cautions and notes are not exhaustive. Proper service methods are
important to the safe, reliable operation of equipment. Improper service methods can damage
equipment.
The service procedures recommended and described in this service manual provide effective
methods of performing service operations. Service engineers should have prior repair knowledge
and experience as well as appropriate training for the product before performing service
procedures.
● Be sure your working environment is dry and clean and meets all government safety
requirements.
● Be sure that other persons are safe while you are servicing the product.
● Do not perform any action that can cause a hazard to the customer or make the
product unsafe.
● Use proper safety devices to ensure your personal safety.
● Always use approved tools and test equipment for servicing.
● Never assume the product’s power is disconnected from the main power supply. Check
that it is disconnected before opening the product’s cabinet.
● Modules containing electrical components are sensitive to electrostatic discharge
(ESD). Follow ESD safety procedures while handling these parts.
● Some products contain more than one battery. Do not disassemble or expose a battery
to high temperatures, such as throwing into fire, or the battery may explode.
● Refer to government requirements for battery recycling or disposal.
This information provides general service information for the monitor. Adherence to the
procedures and precautions is essential for proper service.
IMPORTANT: Only trained service personnel who are familiar with this HP product should perform
service or maintenance for it. Before performing any service or maintenance, personnel must
read the important safety information.
IMPORTANT: You must disconnect the power cord from the power source before opening the
monitor to prevent component damage.
To Next Page
Loading...
Need help?
General
