4. Disconnect USB board cable (4) from the ZIF on the bottom of the board.
To install the WWAN board, reverse this procedure.
SSD board
To remove the SSD board, use this procedure and illustration.
Table 8-5
SSD board description and part number
Description Spare part number
SSD board N96469-001
Before removing the SSD board, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 62).
2. Remove the bottom cover (see Bottom cover on page 62).
3. Remove the battery (see Battery on page 74).
Remove the SSD board:
SSD board
79
To Next Page
Loading...
