5. If the WWAN antenna is not connected to the terminal on the WWAN module, a protective sleeve
must be installed on the antenna connector, as shown in the following illustration.
To install the WWAN module, reverse this procedure.
When installing a WWAN module, use the following illustration to determine the proper screw location for
the module.
(1): Long WWAN module
(2): Short WWAN module
Solid-state drive
To remove the solid-state drive (SSD), use this procedure and illustration.
Table 7-5
Solid-state drive descriptions and part numbers
Description Spare part number
2 TB, TLC M52027-001
2 TB, TLC, for use in the People's Republic of China (PRC) N77396-001
Solid-state drive 69
To Next Page
Loading...
