● Speaker cable (3)
● Keyboard cable (reverse ZIF) (4)
● Smart card reader cable (ZIF) (5)
● Touchpad cable (ZIF) (6)
● Keyboard backlight cable (ZIF) (select products only) (7)
● NFC module cable (ZIF) (8)
● Fingerprint reader cable (ZIF) (select products only) (9)
● I/O board cable (ZIF) from I/O board (10)
2. Remove the three Phillips M2.0 × 1.8 screws (1).
3. Remove the three Phillips M2.0 × 4.0 screws (2).
4. Remove the plastic I/O bracket (3) from the right edge of the board.
88
Chapter 8 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
