i. Separate the display assembly from the computer (2).
2. To replace the display bezel or the internal display assembly subcomponents:
a. Flex the bottom inside edge (1) of the bezel to release it from the display back cover.
b. Flex the left (2) and right inside edges of the bezel to release it.
c. Flex the top inside edge (3) of the bezel to release it.
d. Remove the bezel (4) from the display back cover.
The bezel is available using the following spare part numbers:
● N09023-001: For use on displays without a camera
● N09024-001: For use on displays with an IR camera and ACS
● N09025-001: For use on displays with an RGB camera and ACS
Display assembly
63
To Next Page
Loading...
