3. To remove the display panel:
a. The display panel is secured to the display back cover with tape that is installed under the left
(1) and right sides of the panel. To remove the panel, use tweezers to grasp the end of the tape
(2). While turning the tweezers, wrap the tape around the tweezers as you continue to pull the
tape out (3) from behind the display panel. You must pull the tape multiple times before it is
completely removed.
b. Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in
front of the display back cover.
64
Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
