HP EliteBook Folio 1040 G2

●
Use the arrow keys to select Exit > Ignore Changes and Exit, and then press enter.
-Or-
●
Use the arrow keys to select Exit > Exit Discarding Changes. Click Yes, and then press enter.
Restoring factory default settings in Setup Utility
1. Start Setup Utility.
2. Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3. When the Setup Conrmation is displayed, press enter.
4. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and
then press enter.
The Setup Utility factory settings take eect when the computer restarts.
NOTE: Your password, security, and language settings are not changed when you restore the factory
settings.
Exiting Setup Utility
●
To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow
keys to select Exit > Exit Saving Changes, and then press enter.
●
To exit Setup Utility without saving your changes from the current session:
◦
Use the arrow keys to select Exit > Ignore Changes and Exit, and then press enter.
-Or-
◦
Use the arrow keys to select Exit > Exit Discarding Changes. Click Yes, and then press enter.
82 Chapter 9 Using Setup Utility (BIOS) in Ubuntu Linux