Table 2-8 Bottom components and their descriptions (continued)
Component Description
(2) Vent Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to
cool internal components and prevent overheating. It is
normal for the internal fan to cycle on and off during
routine operation.
Rear
Use the illustration and table to identify the rear component.
Table 2-9
Rear component and its description
Component Description
Vent (select products only) Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal for
the internal fan to cycle on and off during routine operation.
Labels
The labels affixed to the computer provide information that you might need when you troubleshoot
system problems or travel internationally with the computer. Labels can be in paper form or imprinted on
the product.
IMPORTANT: Check the following locations for the labels described in this section: the bottom of the
computer, inside the battery bay, under the service door, on the back of the display, or on the bottom of
a tablet kickstand.
● Service label—Provides important information to identify your computer. When contacting support,
you may be asked for the serial number, the product number, or the model number. Locate this
information before you contact support.
Your service label will resemble one of the following examples. Refer to the illustration that most
closely matches the service label on your computer.
Rear
15
To Next Page
Loading...
