EasyManuals Logo

HP elitedisplay e230t User Manual

HP elitedisplay e230t
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Setting up the monitor
Installing the monitor stand
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-uniformity of
color or disorientation of the liquid crystals. If this occurs, the screen will not recover to its normal condition.
1. Lay the display head face down on a at surface covered by a clean, dry cloth.
2. Slide the top of the mounting plate (1) on the stand under the upper lip of the recess in the back of the
panel.
3. Lower the bottom of the stand's mounting plate (2) into the recess until it snaps into place.
4. The latch (3) pops up when the stand is locked in place.
NOTE: The optional HP PC Mounting Bracket for Monitors can be installed on the back of the monitor stand
to enable an HP Desktop Mini PC or Thin Client to be mounted on the stand. Refer to the documentation
included with the HP PC Mounting Bracket for instructions.
Setting up the monitor 5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP elitedisplay e230t and is the answer not in the manual?

HP elitedisplay e230t Specifications

General IconGeneral
Color gamut72 %
Pixel pitch0.2652 x 0.2652 mm
Aspect ratio16:9
Screen shapeFlat
LED backlightYes
Backlight typeW-LED
Glossy displayNo
Display diagonal23 \
Touch technologyMulti-touch
Touchscreen typeTable
Display brightness250 cd/m²
Display technologyLED
Touchscreen technologyCapacitive
Contrast ratio (dynamic)500000:1
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Display diagonal (metric)58.42 cm
Number of simultaneous touchpoints10
Product colorBlack, Silver
Country of originChina
Placement supportedHorizontal
Display viewable area (HxV)509.184 x 286.416 mm
Dimensions (W x D x H) with stand520.8 x 189 x 486.6 mm
Cables includedAC, USB, VGA
Tilt angle range-5 - 25 °
Height adjustment150 mm
Power supply typeAC
Power consumption (max)57 W
Power consumption (standby)0.5 W
Power consumption (typical)29 W
USB hub version3.2 Gen 1 (3.1 Gen 1)
USB Type-A downstream ports quantity2
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)189 mm
Width (with stand)520.8 mm
Height (with stand)486.6 mm
Weight (with stand)4900 g
Depth (without stand)52.3 mm
Height (without stand)311.95 mm

Related product manuals