HP elitedisplay e230t

Rear components
Component Function
1 Master power switch Turns o all power to the monitor.
NOTE: Putting the switch in the O position will yield the
lowest power state for the monitor when not in use.
2 Power connector Connects the AC power cord to the monitor.
3 DisplayPort connector Connects the DisplayPort cable to the monitor.
4 HDMI connector Connects the HDMI cable to the monitor.
5 VGA connector Connects the VGA cable to the monitor.
6 USB 3.0 upstream connector Connects the USB hub cable from the source device to the
monitor.
7 USB connectors Connect USB devices to the monitor.
Product features and components 3