EasyManua.ls Logo

HP ENVY PRO

HP ENVY PRO
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hard drive
The hard drive is located under the display panel. The hard drive is housed in a bracket and has a removable
connector/cable. One cable connects the drive to the system board.
Description
2 TB, 5400 rpm, 2.5 inch
1 TB, 5400 rpm, 2.5 inch
To remove the hard drive:
1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 17).
2. Remove the bezel (see Bezel on page 23).
3. Remove the display panel (see Display panel on page 26).
4. Slide the label holder out so you can gain access to the hard drive.
5. Disconnect the hard drive cable from the system board (1).
6. Remove the three screws (2) that secure the hard drive assembly to the computer.
30 Chapter 4 Removal and Replacement Procedures

Table of Contents

Related product manuals