HP F310 - Initial Device Configuration and Settings; Setting Automatic Recording Function; Setting the Date and Time

2.5 Initial Settings
Before using the device, we recommend you enable the Automatic
Record function and set up the correct date and time.
2.5.1 Set Automatic Recording
To enable the recording to start automatically after you turn on the
power, do the following:
1. Press the
button to enter the OSD menu.
2. Press the
/ button to select
Automatic Record and press the
button.
3. Press the
/ button to select On
and press the
button.
4. Press the
button to exit the menu.
2.5.2 Set the Date and Time
To set the correct date and time, do the following:
1. Press the
button to enter the OSD menu.
2. Press the
/ button to select Date / Time and press the
button.
3. Press the
/ button to adjust the
value and press the
button to
move to another field.
4. Repeat step 3 until the date and time
setting is complete.