10
2.3 Connecting to Power
Use only the supplied car adapter to power up the camcorder.
1. Connect one end of the car adapter to the USB connector of the
camcorder. USB port input: DC 5V / 2A.
2. Plug the other end of the car adapter to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically powers on. Car adapter input: DC 12 / 24V.
Note:
Use only the supplied car adapter. DO NOT use the other brand of car adapters,
otherwise it may cause the product mal-function.
To Next Page
Loading...
