19
3.6 Collision Detection
If the Collision Detection function is enabled, this camcorder begins
emergency recording once it detects any collision. Sensitivity of the
Collision Detection function is set to Middle by default, if user wants to
change the settings of Collision Detection, do the following:
1. Tap to stop recording and tap
to enter menu setting.
2. Slide the screen to choose Collision Detection option and tap to
enter. Choose your favorite sensitivity level from the options, High,
Middle, or Low. If you choose Off, then the camcorder will not
trigger emergency recording any more.
3. Tap to return to recording screen.
To Next Page
Loading...
