18
3.5 Parking Mode
To monitor the vehicle when it is parked, you can activate Parking Mode.
Before activate Parking Mode, please seek for professional shop to install
ACC cable in advance.
Follow the steps below to set up Parking Mode.
1. In the recording screen, tap to stop recording and tap to
enter menu setting.
2. Slide the menu list and choose [Parking Mode] option.
3. Tap to choose 12 hours or 24 hours.
4. Tap to return to preview screen.
5. When car’s engine is turned off, the camcorder will automatically
enter parking mode, and record videos by 1 frame per second.
When the set up time of parking mode is reached, either 12 hours or
24 hours, the camcorder will power off automatically.
6. In Parking Mode, when collision is detected, the camcorder will
automatically trigger the emergency recording and the file will be
saved in Event folder. The emergency file’s length is same as
normal file’s, and will not be overwritten by the normal loop
recording files.
Note:
1. ACC cable is optional. Please consult the dealer for purchase and seek for specific
professional store for installation.
2. The recorded files under Parking Mode are saved in the Normal folder.
To Next Page
Loading...
