12
2.5 Initial Settings
2.5.1 Set the Date and Time
We recommend to set up date and time before initial use.
To set the correct date and time, do the following:
1. In the recording screen, tap button
to stop recording.
2. tap to enter [Setting] page.
3. Use finger to slide the menu page and tap [Date/Time Setting] to
set up.
4. Tap [+] [-] to change the number, and tap [OK].
5. Repeat 4 until all the value is set. Tap [OK] to return to menu page.
6. Tap to return to preview screen.
Note:
To ensure accurate date/time stamped on the file, you are recommended to re-set up
date/time if the car camcorder is not in use for over 7 days.
To Next Page
Loading...
