HP f790 - Powering On, Off, and Reset

11
2.4 Powering the Camcorder On / Off and Reset
2.4.1 Auto Power On/Off
Once the vehicle engine is started, the camcorder automatically powers
on. And the recording will automatically start.
Once the vehicle engine shuts down, the camcorder automatically saves
the recording and turns off the power.
Note:
Automatic power up and shut down assumes the power socket is linked to the car
ignition.
2.4.2 Manual Power On/Off
To manually turn on the power, press the POWER button.
To turn off, long press the POWER button.
2.4.3 Reset the camcorder
To reset, use a pin to insert RESET hole and hold for at least 3 seconds.