HP FlexNetwork 5140 EI Series User Manual

54
NOTE:
•
As a best practice, use HPE SFP transceiver modules and cables for the SFP ports.
•
The HPE SFP transceiver modules and cables available for the SFP ports
are subject to change
over time. For the most up-to-date list of HPE SFP transceiver modules and
cables available for
the SFP ports, contact your HPE sales representative or technical support engineer.
•
For the specifications of the HPE SFP transceiver modules and cables, see HPE Transceiver
Modules User Guide.
SFP+ port
To connect SFP+ ports over a long distance, use SFP/SFP+ transceiver modules and optical fibers.
To connect SFP+ ports over a short distance, use SFP+ cables. The SFP+ ports on the switch
support the following transceiver modules and cables:
•
GE SFP transceiver modules in Table 22.
•
10-GE SFP+ transceiver modules in Table 24
•
10-GE SFP+ cables in Table 25.
Table 24 10-GE SFP+ transceiver modules available for the SFP+ ports
Product
code
HPE
description
Central
wavelengt
h (nm)
Connect
or
Fiber
diameter
(µm)
Modal
bandwidt
h (MHz ×
km)
Max
transmission
distance
JD092B
HP X130 10G
SFP+ LC SR
Transceiver
850 LC
Multi-mode,
50/125
2000 300 m (984.25 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
Multi-mode,
62.5/125
200 33 m (108.27 ft)
160 26 m (85.30 ft)
JD094B
HP X130 10G
SFP+ LC LR
Transceiver
1310 LC
Single-mod
e, 9/125
N/A
10 km (6.21
miles)
JL740A
HPE X130
10G SFP+ LC
BiDi
40km-Downli
nk
Transceiver
TX: 1330
RX: 1270
LC
Single-mod
e, 9/125
N/A
40 km (24.86
miles)
JL739A
HPE X130
10G SFP+ LC
BiDi
40km-Uplink
Transceiver
TX: 1270
RX: 1330
LC
Single-mod
e, 9/125
N/A
40 km (24.86
miles)
JG234A
HPE X130
10G SFP+ LC
ER 40km
Transceiver
1550 LC
Single-mod
e, 9/125
N/A
40 km (24.86
miles)
JG915A
HPE X130
10G SFP+ LC
LH 80km
Transceiver
1550 LC
Single-mod
e, 9/125
N/A
80 km (49.71
miles)

HP FlexNetwork 5140 EI Series Specifications

General

Brand	HP
Model	FlexNetwork 5140 EI Series
Category	Switch
Language	English