58
Mode LED
Ethernet port LED
Description
power supply requirement of the port.
Off
The port is not connected to a PD or PoE is not enabled on
the port.
Flashing
yellow (IRF
mode)
Steady green
The Ethernet port LEDs on the switch work in conjunction to
indicate the IRF member ID of the switch. For example, if the
LED for port 5 is steady green and the other port LEDs are
off, the IRF member ID of the switch is 5.
Table 33 Ethernet port LED description for non-PoE switch models
Steady green A link is present on the port.
Flashing green The port is sending or receiving data.
Off No link is present on the port.
To Next Page
Loading...
Need help?
General