NOTE:
If you are configuring the Smart Array P700m/512 Controller or the HPE StorageWorks SB40c
storage blade (P400 controller), then you can enter ORCA from POST by pressing the F8 key when
prompted.
Creating a logical drive
Procedure
1. At the ORCA main menu, select Create Logical Drive.
2. Select the physical disks to be included in the logical drive in the Available Physical Drives section.
3. To select the Raid Configurations section and select the RAID type for the logical drive, press Tab.
4. To select the Spare section and assign spare disks, as needed, press Tab.
5. To create the logical drive, press Enter. A summary of your choices appears.
138 Creating a logical drive
To Next Page
Loading...
Need help?
General