Chapter 2
Installing the Server
Standalone and To-Be-Racked Systems
47
Standalone and To-Be-Racked Systems
Servers shipped in a stand-alone or to-be-racked configuration must have the core I/O handles and the PCI
towel bars attached at system installation. Obtain and install the core I/O handles and PCI towel bars from
the accessory kit A6093-04046. The towel bars and handles are the same part. Refer to service note
A6093A-11.
Rack-Mount System Installation
Information is available to help with rack-mounting the server. This list is intended to guide the HP
Installation Specialist to the documentation that has been written by the Rack and Power team. The server
can be installed in both the 10000 Series Rack and the Rack System/E.
The external Web site is:
http://h18004.www1.hp.com/products/servers/platforms/rackandpower.html
The internal Web site for10K Racks is:
http://isspit.corp.hp.com/application/view/ProdCenter.asp?OID=254479
The interal Web site for the System/E Racks is:
http://isspit.corp.hp.com/application/view/ProdCenter.asp?OID=1130382
To Next Page
Loading...
