HP Integrity rx7640 - Figure 2-15 Securing each Caster Cover to the Server; Figure 2-16 Completed Server

Chapter 2
Installing the Server
Wheel Kit Installation
61
Step 16. Insert the slot on the caster cover into the front caster. Secure the cover to the server by tightening
the captive screw on the cover at the rear of the server.
Figure 2-15 Securing Each Caster Cover to the Server
Step 17. Wheel kit installation is complete when both caster covers are attached to the server, and the front
bezel and all covers are installed.
Figure 2-16 Completed Server
Caster Cover
Caster Cover
Rear Casters
Front Casters