HP Integrity rx7640 - Figure 2-10 Component Locations

Chapter 2
Installing the Server
Wheel Kit Installation
56
Use the following procedure to install the wheel kit.
Step 1. Cut and remove the polystrap bands securing the HP server to the pallet.
Step 2. Lift the carton top from the cardboard tray resting on the pallet.
Step 3. Remove the bezel kit carton and the top cushions from the pallet.
Figure 2-10Component Locations
Step 4. Unfold bottom cardboard tray.
Top Cushions
Cardboard
Tray
Bezel Kit