Field Description
srcIP IP address of the NMS
op SNMP operation type (GET or SET).
node MIB node name and OID of the node instance.
erroIndex Error index, with 0 meaning no error.
errorstatus Error status, with noError meaning no error.
value
Value set when the SET operation is performed (this field is null
for a GET operation).
If the value is a character string that has characters beyond the
ASCII range 0 to 127 or invisible characters, the string is
displayed in hexadecimal format, for example, value =
<81-43>[hex].
NOTE:
The information center can output system event messages to several destinations, including the terminal
and the log buffer. In this example, SNMP log messages are output to the terminal. To configure other
message destinations, see the chapter “Information center configuration.”
94
To Next Page
Loading...
Need help?
General
