Removal and Replacement Strategy 6-5
Hint To insert self-tapping screws, turn the screw to the left
(counter-clockwise) until it clicks, then turn it to the right (clockwise)
until it is seated. If a self-tapping screw-hole strips, you must repair the
screw-hole or replace the affected assembly.
Long screw
(4.8 in/116 mm)
Used to anchor Tray 1 Pickup
Assembly
Table 6-1. Screws Used in the Printer (continued)
Drawing and Description Purpose
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...