Menu item Sub-menu item Sub-menu item Description
Supply Settings Black Cartridge Very Low Setting Stop: The product stops printing until you replace the print
cartridge.
Prompt*: The product stops printing and prompts you to
replace the print cartridge. You can acknowledge the
prompt and continue printing.
Continue: The product alerts you that the print cartridge is
very low, but it continues printing.
Low Threshold Enter a percentage for the low threshold setting.
Color Cartridges Very Low Setting Stop: The product stops printing until you replace the print
cartridge.
Prompt*: The product stops printing and prompts you to
replace the print cartridge. You can acknowledge the
prompt and continue printing.
Continue: The product alerts you that the print cartridge is
very low, but it continues printing.
Print Black: When a color print cartridge becomes very low,
the product prints in black only to prevent fax interruptions.
When you choose to replace the very low print cartridge,
color printing resumes automatically. To configure the
product to print in color and use the remaining toner in the
print cartridge past very low, follow these steps:
NOTE: Prompt is the default setting, but if you install the
fax wizard on your first incoming fax, the setting switches
automatically to Print Black.
1.
On the product control panel, touch the Setup
button, and then touch the System Setup button.
2. Touch the At very low button, and then touch the
Color Cartridges button. Touch the Continue button.
Low Threshold Set a low threshold percentage setting for the following
colors:
●
Cyan
●
Magenta
●
Yellow
Store Usage Data Select where to store the product's usage data, either on the
supplies or not on the supplies.
Volume Settings Alarm Volume
Ring Volume
Key-Press Volume
Phone Line Volume
Set the volume levels for the product. The following options
are available for each volume setting:
●
Off
●
Soft
●
Medium*
●
Loud
ENWW
Tools for troubleshooting
113
To Next Page
Loading...
