HP LaserJet Pro 500 - No fax answer. Canceled send.; No fax answer. Redial pending.; No fax detected.

No fax answer. Canceled send.
Description
Attempts to redial a fax number failed, or the Redial if No Answer option was turned off.
Recommended action
Call the recipient to ensure that the fax machine is on and ready.
Check that you are dialing the correct fax number.
Check that the redial option is enabled.
Unplug the telephone cord from both the product and the wall and replug the cord.
Unplug the product telephone cord from the wall, connect a telephone, and try making a voice call.
Make sure that the phone cord from the wall telephone jack is plugged into the line
port.
Connect the product phone cord into a jack for another phone line.
If the error persists, contact HP. See
www.hp.com/support/lj500colorMFPM575 or the support flyer
that came in the product box.
No fax answer. Redial pending.
Description
The receiving fax line did not answer. The product attempts to redial after a few minutes.
Recommended action
Allow the product to retry sending the fax.
Call the recipient to ensure that the fax machine is on and ready.
Check that you are dialing the correct fax number.
If the product continues to redial, unplug the product telephone cord from the wall, connect a
telephone, and try making a voice call.
Make sure that the phone cord from the wall telephone jack is plugged into the line
port.
Connect the product phone cord into a jack for another phone line.
Try a different phone cord.
If the error persists, contact HP. See
www.hp.com/support/lj500colorMFPM575 or the support flyer
that came in the product box.
No fax detected.
Description
The product answered the incoming call but did not detect that a fax machine was calling.
134 Chapter 2 Solve problems ENWW
draft version