i
Installing the router
ARNING!
To avoid injury, do not touch bare wires, terminals, or parts with high-voltage hazard signs.
IMPORTANT:
The barcode on the router chassis contains product information that must be provided to local sales
agent before you return a faulty router for service.
Keep the tamper-proof seal on a mountin
screw on the chassis cover intact, and if you want to open the
chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence.
Installation prerequisites
You have read "Preparing for installation" carefully.
All requirements in "Preparing for installation" are met.
Installation flow
You can install the router on a workbench or on a rack. Select an installation method according to the
installation environment, and follow the installation flowchart shown in Figure 2.
To Next Page
Loading...
