x
Figure 12 Mounting the router to the rack
Grounding the router
ARNING!
Correctly connecting the router grounding cable is crucial to lightning protection and EMI protection.
IMPORTANT:
The resistance reading should be smaller than 5 ohms between the chassis and the ground.
Grounding the router through the grounding terminal on the rack
IMPORTANT:
Make sure the rack is properly grounded before grounding the router.
To connect the grounding cable:
1. Remove the two grounding screws from the rear panel of the chassis.
2. Attach the grounding screws to the ring terminal of the grounding cable.
To Next Page
Loading...
