iii

Solution

1. Select 8 on the main BootWare menu to clear the console interface login password:

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Modify BootWare Password |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Skip authentication for console login |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Enter your choice(0-9):8

The following output indicates that you have successfully cleared the console login password.

Clear Application Password Success!

2. Select 0 from the main BootWare menu to reboot the system.

System is rebooting now.

System start booting...

Booting Normal Extend BootWare....

3. After the system restarts up, set a new password.

<Sysname> system-view

[Sysname] user-interface console 0

[Sysname-ui-console0] authentication-mode password

[Sysname-ui-console0] set authentication password cipher 123456

The commands above configure password authentication for the console user interface and set the

ciphertext password 123456.

For security purposes, all keys set with the set authentication password { cipher | simple }

password command, including keys configured in plain text, are saved in cipher text.

4. Execute the save command after modifying the user password to save the new password.

[Sysname] save

NOTE:

HP recommends that you save the modification as the default configuration file.

Troubleshooting interface module, cable, and

connection failure

Symptom

After an interface module is installed and the router is powered on, the LEDs on the interface module

panel indicate that the interface module is operating improperly.

HP MSR2000 Series Preparing For Installation

Other manuals for HP MSR2000 Series