10. If it is necessary to remove the camera privacy cover, lift the cover straight up and o the display.
The camera privacy cover is available as spare part number L77237-001.
11. If it is necessary to remove the hinges from the display enclosure, remove the two Phillips broad head
M2.5 × 2.5 screws (1) and the Phillips M2.0 × 4.0 screw (2) from the bottom of each hinge.
12. Remove the hinges from the enclosure (3).
The display hinges are available as spare part number L78093-001.
Component replacement procedures 57
To Next Page
Loading...
